LLDP-MED - Show / manipulate MED TLV configurations

lldptool -t -i ethx -V [ TLV_TYPE ] enableTx

lldptool -T -i ethx -V [ TLV_TYPE ] enableTx = { yes | no }

lldptool -T -i ethx -V LLDP-MED devtype = { class1 | class2 | class3 }

lldptool -t -i ethx -V LLDP-MED devtype

TLV_TYPE : = {LLDP-MED | medCap | medPolicy | medLoc | medPower | medHwRev | medFwRev | medSwRev | medSerNum | medManuf | medModel | medAssetID }

The LLDP-MED extensions support the Link Layer Discovery Protocol for Media Endpoint Devices defined in the ANSI/TIA-1057-2006 document. Each TLV can be configured as a class1 , class2 or class3 device. Class I devices are the most basic class of Endpoint Device, Class II devices support media stream capabilities and Class III devices directly support end users of the IP communication system. See ANS-TIA-1057 for clarification of class types.

enableTx Enables the TLV to be transmitted

devtype Set or query the class type of the device.

List of supported TLV specifiers applicable to Media Endpoint Devices.

LLDP-MED apply arguments to all supported MED TLVs.

medCAP LLDP-MED Capabilities TLV

medPolicy LLDP-MED Network Policy TLV

medLoc LLDP-MED Location TLV

medPower LLDP-MED Extended Power-via-MDI TLV

medHwRev LLDP-MED Hardware Revision TLV

medFwRev LLDP-MED Firmware Revision TLV

medSwRev LLDP-MED Software Revision TLV

medSerNum LLDP-MED Serial Number TLV

medManuf LLDP-MED Manufacturer Name TL

medModel LLDP-MED Model Name TLV

medAssetID LLDP-MED Asset ID TLV

Enable class1 MED device on eth2

lldptool -T -i eth2 -V LLDP-MED enableTx=yes devtype=class1

Query class type of MED on eth2

lldptool -t -i eth2 -V LLDP-MED -c devtype

Query transmit state of medPolicy on device eth2

lldptool -t -i eth2 -V medPolicy -c enableTx

o

Link Layer Discovery Protocol for Media Endpoint Devices (http://www.tiaonline.org/standards/technology/voip/documents/ANSI-TIA-1057_final_for_publication.pdf)

lldptool(8), lldpad(8)

John Fastabend

This document was created by man2html, using the manual pages.

Time: 20:18:51 GMT, January 24, 2013